IES-6000 Series
Future Proof Next Generation Multi-Service IP Access Solution
Future proof architecture
As the flagship of ZyXEL’s MSAN product portfolio, the IES-6000 Series is equipped with non-blocking Gigabit backplane, failover-enabled Management Switch Cards (MSC), dual input power modules and various high-port density multi-purpose line cards. With comprehensive IP-centric firmware features, the IES-6000 Series is a high-capacity system that facilitates telcos/ISPs to deliver high-quality residential or business user services experience at competitive APEX/OPEX as well as satisfying its current and future infrastructural requirements of reliability, flexibility and scalability.
Easy & reused logistics
The IES-6000 Series is a 12.5 U-height, 17-slot chassis-based multi-service access node capable of adopting the same line cards as those for IES-5112/5106 systems. Both the new-generation MSC, MSC1024GB & MSC1224GB, share the same attributes of their predecessors and are IPv6 hardware ready.
The variety of line cards are including 72-port ADSL2+ line card that provide subscribers with asymmetric transmission bandwidth up to 25 Mbps/2.4 Mbps; 48-port SHDSL line cards with symmetric transmission bandwidth of 5.69 Mbps per port; 24-port and 48-port VDSL2 line cards that offer up profile 30a (100/100 Mbps) high-speed connectivity per port over copper wires; 20-port fiber-based Gigabit Ethernet line card that supports 100/1000 Mbps transmission speed per port and 8-port E1 IMA card. The new 48-port ADSL2+/VoIP combo card with built-in ETSI/ANSI POT splitter can be managed by the new MSC1024GC Management Switch Signaling Card. MSC1024GC is able to support IP aggregation for all the combo cards in the same chassis.
Advanced Triple Play and mass deployment functionality
The IES-6000 Series inherits all the Layer 2 and Layer 3 QoS, security and multicast functionalities from the IES-5112/5106, while the following new features are added to satisfy the requirements for massive field deployments: (1) IP bridge functionality that alleviates the Layer 2 access network deployment restrictions resulted from MAC address table limitation and security attack issues; (2) ARP Proxy which minimizes the ARP broadcast requests to all subscribers; (3) TACACS+ mechanism to support remote authentication with TACACS+ servers; (4) VLAN-aware DHCP snooping which adds VLAN information into DHCP snooping tables; (5) DHCP option 82 sub-option 2 for providing remote client ID information to DHCP servers for flexible IP address assignment.
Robust physical safety design
The IES-6000 Series supports 1+1 MSC redundancy with a failover switching time less than 1 second. In addition, voltage, temperature and fan speed sensors are fitted into the system. When an abnormal condition is detected, the LED displays and/or the corresponding alarms will alert administrators of the situation. In case the system temperature rises over the preset threshold, thermal cutoff protection will kick in to shut down the system automatically.
Sophisticated OAM&P features
The IES-6000 Series provides various management methods: local console port, Web-based configuration, Telnet and SNMP v1/v2c/v3-based EMS (NetAtlas EMS). The management functions include Alarm and Status Surveillance, Configuration Management, Performance Management and Fault Management. The IES-6000 Series allows multiple administrative accounts with 3-level access privileges. Accounts with the first-level privilege have full access to all management objects on the Management Information Base (MIB). Second-level accounts have similar access rights except creating new administrative accounts, while the third-level accounts are granted read-only access rights to the MIB objects. NetAtlas EMS also provides view-based MIB management that partial MIB objects can be defined and accessed for customization and security reasons. In addition, XML-based northbound interface is equipped to interoperate with external OSS systems.
DSL Compliant
ADSL: G.992.1 Annex A, G.992.3 Annex A, G.992.5 Annex A
G.992.1 Annex B, G.992.3 Annex B, G.992.5 Annex B
- Support G.992.3 and G.992.5 Spectral Mask
- Support Annex M and Annex L in G.992.3 and G.992.5
- Support EOC and Overhead Channel Access
- Support the latency path function
- Support loop diagnostic function specified
- Support the power management capability
- Support the capability of the Seamless Rate Adaptation (SRA) on-line configuration
- Single and dual end loop test
- G.998.1 port bondingSHDSL: G.991.2, G.991.2.bis, G.998.1
VDSL2: G.993.2, G.994.1, G.997.1.
ATM Traffic Management
Support 8 PVC per DSL port
Support UBR, CBR, rt-VBR, nrt-VBR, QoS Mechanisms
Support ATM Forum TM 4.0 peak cell rate traffic parameter
Support downstream traffic shaping function per ATM PVC
Support ATM F5 OAM cells for End-to-End Loop back test (ITU-T Rec. I.610)
Performance
Eight queues with packet priority scheduling (SPQ, WRR)
Support 1024 IGMP multicast groups
The maximum channel zapping processing time is 250 ms
DSCP to 802.1p mapping
Security
Per port and per VLAN isolation
IEEE 802.1X (authentication)
Rule-based packet filtering (L2 ~ L4 ACL)
MAC count limiting
ARP broadcast filtering
DHCP broadcast filtering
VLAN aware DHCP snooping
NetBIOS filtering
IGMP filtering
Anti IP/MAC address spoofing
Support TACACS+ remote authentication
PPTP, LT2P, IP SEC and GRE pass through
IPoE and PPPoE per VC session
VLAN
4094 IEEE 802.1Q compliant VLAN tagging
VLAN stacking ( Q-in-Q )
VLAN Bridge Function (multiple PVCs to one VLAN) (N:1)
PVC and VLAN one to one mapping (1:1)
VLAN Trunking (Single PVC join Multiple VLAN) (1:N)
Support GVRP function
Traffic Management
Bandwidth control and Broadcast/Multicast/Unknown Unicast control on Gigabit Ethernet ports
RSTP : IEEE 802.1d, IEEE 802.1w, IEEE 802.1s
IP Bridge
IEEE 802.3ad (Link Aggregation Control Protocol)
IP multicast forwarding
IGMP v1, v2 snooping/proxy
IGMP multicasting channel limiting
VLAN aware DHCP snooping
DHCP Relay Option 82 with Sub-option 1 & 2
TR-101 compliant PPPoE intermediate Agent
Multicast bandwidth control
L2~L4 ACL
IGMP group count / filtering profile
VoIP Features
Codes: G.711, G.726, G.729a/b, G.723.1
Network signaling protocols: ITU-T H.248 v2, SIP v2 (RFC3261)
RTP (RFC 1889)
RTCP (RFC 1890)
FAX/Modem pass through (T.38) via RTP
Tone detection and generation (bi-directional)RFC2833 RTP Payload for DTMF
Echo cancellation and auto gain control (G.165, G.168)
Voice Activity Detection (VAD)
Comfort Noise Generation (CNG)
Caller ID generation and detection
Supplementary services
- Local dial available
- Emergency call local route
- Do not disturb
- Selective/Anonymous call rejection
- Call waiting
- Call transfer (blind and attended transfer)
- Call return and call back on busy
- Off hook warning tone
Network Management
Local management through a craft terminal
Web-based Management Interface
View-based Network Management
Support XML-based North Bound Interface (through ZyXEL NetAtlas EMS)
In-band and out-of-band IP interface for management (SSH, SFTP)
SNMP management (through ZyXEL NetAtlas EMS)
SNMPv1/v2c/V3 agent/traps
Standard MIBs
- RFC 1213 MIB II
- ADSL Line MIB (RFC2662)/ Extension Line MIB(RFC 3440)
- SHDSL Line MIB (RFC 3276)
- VDSL line MIB (RF3728)
- Bridge MIB/Extension MIB
- RMON MIB (RFC 1757)Vendor specific MIBs, e.g.
- Chassis Management MIB (Fan Speed, Voltage, Temperature)
- Static route for MGMT IP
IES-6000M
17-slot rack mountable enclosure, 19" or 23" chassis
Maximum 16 slots for DSL line cards (slot 1~7, 8 or 9, 10~17)
2 slots for management and switch cards (Slot 8 & 9)
2 DC power input module and filter
One FAN and dust filter module
One Alarm Module
Management Switch Cards—MSC1224GB/MSC1024GB/MSC1224G/MSC1024G
Failover-enabled network termination card
Embedded 48G, non-blocking full duplex switching fabric
MSC1224GB supports two 10G (SFP+) and four 1G uplink/subtending interfaces:
- 2 optical fiber port (SFP+ modules)
- 4 1000 Mbps interface modules (combo design, SFP and copper)MSC1024GB supports four 1G Ethernet uplink/subtending interfaces:
- 4 1000 Mbps interface modules (combo design, SFP and copper)One RS232 (DB-9) serial or mini-RJ11 console port
One 10/100M out-of-band Mgmt interface
16 Gigabit Ethernet (SerDes) backplane interface
16K MAC addresses
1024 L2 multicast groups (1K scalability)
4K VLANs
IPv6 capable
E1 IMA Card—IMA1408G-81
Hot swappable 8-port E1 IMA card, 8 groups per card
Support G.703, G.704
Full-duplex bandwidth up to 16M
One mini-RJ11 console port
Support RFC1483/1577/2364/2684
Support ATM Forum Rec UNI 3.0, UNI 3.1, UNI 4.0
Support ITU-TI.361, I.371, G.804
Ethernet Line Card—ELC1220G-55
Hot swappable 20-port active Gigabit Ethernet line card
20 open slots for Gigabit or Fast Ethernet SFP(1000/100BASE-FX/BX/LX/EX)
4 open slots for Gigabit Ethernet C-SFP
One mini-RJ11 console
VDSL Line Card—VLC1424G-56
Hot swappable 24-port VDSL2 line card
Support G.993.2, G.994.1, G.997.1
Maximum transmission rate up to 100 Mbps/100 Mbps
One mini-RJ11 console port
Two gigabit backplane
Support VDSL2 profiles 8a, 8b, 8c, 8d, 12a,12b, 17a and 30a
Support frequency allocation bandplan 998 and 997
Support customer PSD, RFI notch, singlelatency in PTM mode and INP
Support trellis coding
Support IEEE 802.1ag Connectivity Fault Management (CFM)
IPv6 capable
VDSL Line Cards—VLC1348G-51/VLC1348G-53/VLC1324G-53
Hot swappable 48-port VDSL2 line card over POTS and over ISDN
Support G.993.2, G.994.1, G.997.1
Maximum transmission rate up to 100 Mbps/ 50 Mbps
One mini-RJ11 console port
Two gigabit backplane
Support VDSL2 profiles 8a, 8b, 8c, 8d, 12a,12b and 17a
Support frequency allocation bandplan 998 and 997
Support U0 band, customer PSD, RFI notch, single latency in PTM mode and INP
Support UPBO and DPBO, Reed Solomon and trellis coding
Support ADSL fall back with ADSL/ADSL2/ADSL2+ CPE in Annex A, J, M, L modes
Support IEEE 802.1ag Connectivity Fault Management (CFM)
ADSL Line Cards—ALC1372G-51
Hot swappable 72-port ADSL2/ ADSL2+ Annex A line card
Maximum transmission rate up to 25 Mbps/ 2.4 Mbps for ADSL2+
One mini-RJ11 console port
One gigabit backplane
Support G.992.3 and G.992.5 spectral mask
Support EOC and overhead channel access defined in G.992.3 and Rec.G.997.1
Support the latency path function specified in G.992.3 and G.992.5
Support Annex L and Annex M specified in G.992.3 and G.992.5
Support loop diagnostic function specified in G.992.3 and G.992.5
Support the power management capability specified in G.992.3 and G.992.5
Support the capability of the Seamless Rate Adaptation (SRA) on-line configuration specified in G.992.3 and G.992.5
Support ADSL2+ 2-port bonding (G.998.1)
IPv6 capable
ADSL Combo Line Card—ALC1348G-51C
Hot swappable 48-port ADSL2+/VoIP Combo Card with built-in ETSI/ANSI POT Splitter
Maximum transmission rate up to 25 Mbps/2.4 Mbps for ADSL2+
One mini-RJ11 console port
One gigabit backplane
Support G.992.3 and G.992.5 spectral mask
Support EOC and overhead channel access defined in G.992.3 and Rec.G.997.1
Support the latency path function specified in G.992.3 and G.992.5
Support Annex L and Annex M specified in G.992.3 and G.992.5
Support loop diagnostic function specified in G.992.3 and G.992.5
Support the power management capability specified in G.992.3 and G.992.5
Support the capability of the Seamless Rate Adaptation (SRA) on-line configuration specified in G.992.3 and G.992.5
Support ADSL2+ 2-port bonding (G.998.1)
Support H.248 version 2 or SIP singling protocol
Compatible CPE including POTS phone, Fax, analog modem and pay phone
Support G.711 a/μ, G.726, G.729 a/b G.723.1
20K Busy Hour Call Attempts (BHCA)
Configurable jitter buffer
Support the generation of dial tone, second dial tone, ringing tone (ring-back tone), busy tone, off-hook warning tone
Support call waiting, call hold, call transfer, return and call back on busy
Emergency call local route
Local dial available
MLT (Metallic Loop Testing for subscriber lines) and GR-909 loop diagnostic
Ringer Max output power: 40 W
IPv6 capable
SHDSL Line Card— SLC1248G-22
Hot swappable 48-port SHDSL line card
Support ETSI TS 101 524 V 1.2.1, ITU-T G.991.2, ITU-T G.991.2.bis
ATM-based multi-pair bonding (G.998.1) up to 8 ports
Symmetric transmission rate of 5.69 Mbps/port
One mini-RJ11 console port
One gigabit backplane
EFM mode compliant to IEEE 802.3, G.998.2
PPP over Ethernet (RFC2516)
OAMPDU Loopback Control
VLAN base QOS (802.1P/Q)
Support 2-wire/4-wire/6-wire and 8-wire mode SHDSL CPE auto detect in either ATM mode and EFM mode
VoIP Line Cards—VOP1372G-61/VOP1248G-61
Hot swappable 72-port VoIP line card
Support H.248 version 2 or SIP singling protocol
Compatible CPE including POTS phone, Fax, analog modem and pay phone
Support G.711 a/μ, G.726, G.729 a/b G.723.1
20K Busy Hour Call Attempts (BHCA)
Configurable jitter buffer
Support the generation of dial tone, second dial tone, ringing tone (ring-back tone), busy tone, off-hook warning tone
Support call waiting, call hold, call transfer, return and call back on busy
Emergency call local route
Local dial available
MLT (Metallic Loop Testing for subscriber lines) and GR-909 loop diagnostic
Ringer Max output power: 24 Watt
IPv6 capable
IES-6000M
Item dimensions (W x D x H): 440 x 285x 544 mm (17.32” x 11.22” x 21.41”)
Item weight: 15 kg (33.15 lb)
Packing dimensions (W x D x H): 705 x 450 x 619 mm (27.75” x 17.71” x 24.36”)
Packing weight: 25.2 kg (55.69 lb)
Management Switch Card—MSC1224GB
Item dimensions (W x D x H): 390.6 x 240 x 13.8 mm (15.39” x 9.45” x 0.55”)
Item weight: 0.9 kg (1.99 lb)
Packing dimensions (W x D x H): 462 x 342 x 123 mm (18.18” x 13.46” x 4.84”)
Packing weight: 1.76 kg (3.89 lb)
Management Switch Card—MSC1024GB
Item dimensions (W x D x H): 390.6 x 240 x 13.8 mm (15.39” x 9.45” x 0.55”)
Item weight: 0.87 kg (1.92 lb)
Packing dimensions (W x D x H): 462 x 342 x 123 mm (18.18” x 13.46” x 4.84”)
Packing weight: 1.7 kg (3.76 lb)
Management Switch Signaling Card—MSC1024GC
Item dimensions (WxDxH):390.6 x 240 x 13.8 mm (15.39" x 9.45" x 0.55")
Item weight: 1.1 kg (2.46 lb.)
Packing dimensions (WxDxH):462 x 342 x 100 mm (18.18" x 13.46" x 3.94")
Packing weight: 1.97 kg (4.34 lb.)
E1 IMA Card—IMA1408G-81
Item dimensions (W x D x H): 390.6 x 240 x 13.8 mm (15.39” x 9.45” x 0.55”)
Item weight: 0.8 kg (1.77 lb)
Packing dimensions (W x D x H): 462 x 342 x 123 mm (18.18” x 13.46” x 4.84”)
Packing weight: 1.8 kg (3.96 lb)
Gigabit Ethernet Line Card—GLC1320G-55
Item dimensions (W x D x H): 390.6 x 240 x 13.8 mm (15.39” x 9.45” x 0.55”)
Item weight: 0.5 kg (1.1 lb)
Packing dimensions (W x D x H): 462 x 342 x 123 mm (18.18” x 13.46” x 4.84”)
Packing weight: 2.48 kg (5.48 lb)
VDSL Line Card—VLC1424G-56
Item dimensions (WxDxH):390.6 x 240 x 13.8 mm (15.39" x 9.45" x 0.55")
Item weight: 1 kg (2.2 lb.)
Packing dimensions (WxDxH):462 x 342 x 123 mm (18.18" x 13.46" x 4.84")
Packing weight: 2.54 kg (5.61 lb.)
VDSL Line Cards—VLC1348G-51/VLC1348G-53
Item dimensions (WxDxH):390.6 x 240 x 13.8 mm (15.39" x 9.45" x 0.55")
Item weight: 1.3 kg (2.87 lb.)
Packing dimensions (WxDxH):462 x 342 x 123 mm (18.18" x 13.46" x 4.84")
Packing weight: 2.62 kg (5.79 lb.)
ADSL Line Card—ALC1372G-51
Item dimensions (W x D x H): 390.6 x 240 x 13.8 mm (15.39” x 9.45” x 0.55”)
Item weight: 1.1 kg (2.43 lb)
Packing dimensions (W x D x H): 462 x 342 x 123 mm (18.18” x 13.46” x 4.84”)
Packing weight: 2.2 kg (4.86 lb)
ADSL Combo Line Card—ALC1348G-51C
Item dimensions (WxDxH):390.6 x 240 x 13.8 mm (15.39" x 9.45" x 0.55")
Item weight: 1.5 kg (3.51 lb.)
Packing dimensions (WxDxH):462 x 342 x 100 mm (18.18" x 13.46" x 3.94")
Packing weight: 2.4 kg (5.37 lb.)
SHDSL Line Card—SLC1348G-22
Item dimensions (W x D x H): 390.6 x 240 x 13.8 mm (15.39” x 9.45” x 0.55”)
Item weight: 0.5 kg (1.1 lb)
Packing dimensions (W x D x H): 462 x 342 x 123 mm (18.18” x 13.46” x 4.84”)
Packing weight: 2.1 kg (4.64 lb)
VoIP Line Card— VOP1248G-61
Item dimensions (WxDxH):390.6 x 240 x 13.8 mm (15.39" x 9.45" x 0.55")
Item weight: 1.4 kg (3.09 lb.)
Packing dimensions (WxDxH):462 x 342 x 123 mm (18.18" x 13.46" x 4.84")
Packing weight: 2.2 kg (4.861 lb.)
Environmental Specifications
Operating environment:
- Temperature: -40°C to 50°C (-40°F to 122°F)
- Humidity: 10 to 95% (Non-condensing)Storage environment:
- Temperature: -40°C to 50°C (-40°F to 122°F)
- Humidity : 10 to 95% (Non-condensing)Power Supply : -48V DC
Full load power consumption :
- IES-6000M: 70 W
- MSC1224GB: 45 W
- MSC1024GB: 40 W
- MSC1024GC: 36 W
- IMA1408G-81: 32 W
- GLC1320G-55: 40 W
- VLC1424G-56: 66 W
- VLC1348G-51/VLC1348G-53: 93 W
- ALC1372G-51: 85 W
- ALC1348G-51C: 166 W
- SLC1348G-22: 45 W
- VOP1372G-61: 144 W